DeltaV 24 V DC Power CHARM

Back To Top

PDP_CHARM_DI_v1

A Power Characterization Module (CHARM) for a 24 V DC Power output.

DeltaV™ 24 V DC Power CHARM

Specs

Device Type

24 V DC Power output

Status Read Back Level for Power Good

> 10 V DC

Status Read Back Level for Power Bad

< 5 V DC

Isolation

Status read back circuitry is optically isolated and factory tested to 1000 V DC. Output power has no isolation from the injection point.

Field Circuit Protection

2 Amp fuse located in Fused-Injected-Power Terminal Block, Field wiring disconnect

CHARM Power Req

12 mA max @ 24 V DC

Injected Power Req

1.01 Amps max @ 24 V DC

CHARM Heat Dissipation

0.32 W

Features

Eliminate marshalling and add I/O anywhere in the plant without affecting control room cabinets
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures